NS100: Field Recording of Network Assets
Tuesday, 12 January 2021
This Network Standard sets out the requirements of recording as-built asset information for Ausgrid’s transmission and distribution networks, and third party fibre assets interacting with company assets.
CN21-01: Insulation Stripping on Pole Substation 25mm² Copper Conductor Connection
Drawing CEOM7104.20 has been updated after joint investigations by the Mains & Standards team with the field staff and the Power Quality team.
NSA2025 : Amending Network Standard NS168 Design and Construction of 33kV, 66kV and 132kV Underground Cables
Network Standard NS168 describes the requirements for the design, construction and installation of 33kV, 66kV and 132kV underground cables for use on the Ausgrid network.
NSA2024 : Amending Network Standard NS130 Laying Underground Cables up to and Including 11kV
This Network Standard provides the requirements for trenching, laying and reinstatement of underground conduits and cables, for distribution cables up to and including 11kV in Ausgrid’s network.
NSA2023 : Amending Network Standard NS211 Working with Asbestos
The purpose of this document is to provide the minimum requirements for working in close proximity to, or disturbing and/or removing. Asbestos Containing Materials (ACM) from the workplace.
NSA2022 : Amending Network Standard NS220 Overhead Design Manual
This document has been produced to support designers of Ausgrid’s overhead network, both internal staff and Accredited Service Providers (ASPs), as well as those checking and auditing design work.
NSA2021 : Amending Network Standard NS135 Construction of 33kV, 66kV and 132kV Overhead Mains
This Network Standard is Ausgrid’s specification for the construction of overhead sub-transmission (33kV, 66kV and 132kV) lines that form part of the Ausgrid network.
NSA2020 : Amending Network Standard NS126 Construction of High Voltage Overhead Mains
This Network Standard is Ausgrid’s specification for the construction of 11kV and 22kV overhead lines that form part of the Ausgrid distribution network.
NSA2019 : Amending Network Standard NS125 Construction of Low Voltage Overhead Mains
This Network Standard is Ausgrid’s specification for the construction of low voltage overhead lines that form part of the Ausgrid distribution network.
NSA2018 : Amending Network Standard NS100 Field Recording of Network Assets
This Network Standard sets out the requirements of recording as-built asset information for Ausgrid’s transmission and distribution networks, and third-party fibre assets interacting with company assets.
NSA2017 : Amending Network Standard NS171 Firestopping in Substations
Amending Network Standard NS171 Firestopping in Substations
NSA2016 : Amending Network Standard NS187 Passive Fire Mitigation Design of Major Substations
This Network Standard details the minimum levels of passive fire protection systems at Ausgrid’s major substations.
NSA2015 : Amending Network Standard NS149 Drawings content for Chamber Type Substations Control Points Cable Risers and Ductlines
Amending Network Standard NS149 Drawings content for Chamber Type Substations Control Points Cable Risers and Ductlines
NSA2014 : Amending Network Standard NS145 Pole Inspection and Treatment
Amending Network Standard NS145 Pole Inspection and Treatment
NSA2013 : Amending Network Standard NS177 11kV Joints (Including Transition Joints) and Terminations -Polymeric Insulated Cables
Amending Network Standard NS177, 11kV Joints (Including Transition Joints) and Terminations - Polymeric Insulated Cables
NSA2012 : Amending Network Standard NS129 11KV Joints and Terminations - Paper Insulated Lead Covered Cables
Amending Network Standard NS129, 11kV Joints and Terminations - Paper Insulated Lead Covered Cables
NSA2011 : Announcing Network Standard NS270 Stray Direct Current Management
The purpose of this document is to minimise the risk of corrosion to Ausgrid assets due to stray direct current.
NSA2010 : Amending Network Standard NS148 Overhead Line Support, Street Light Column, Pit and Pillar Labelling
This Network Standard specifies the requirements and procedure for allocating and installing identification numbers on overhead line supports, street lighting columns, pits, and pillars and ancillary assets in Ausgrid’s supply area.
NSA2009 : Amending Network Standard NS174C Environmental Handbook for Construction and Maintenance
This Handbook forms part of Ausgrid’s Environmental Management System (EMS) and provides guidance for complying with our environmental responsibilities.
NSA2008 : Amending Network Standard NS114 Electrical Design and Construction Standards for Chamber Type Substations
This Network Standard specifies Ausgrid’s requirements for the electrical design, construction and equipping of chamber type distribution substations, for supply of electricity to premises.
NSA2007 : Amending Network Standard NS128 Pole Installation and Removal
NS128 describes the requirements relating to the selection, handling, positioning, erection and removal of poles.
NSA2006 : Announcing Network Standard NS211 Annexure G - LV HRC Fuse Asbestos Product Guide
As part of Ausgrid’s ongoing asbestos maintenance program, independent Licenced Asbestos Assessors have identified Low Voltage HRC fuses of various types as potentially asbestos containing.
NSA2005 : Announcing Network Standard NS211 Annexure F - Asbestos Product Guide
This Product Guide is a collection of data sheets, each representing a unique asbestos-containing product which is often found on Ausgrid assets.
NSA2001: Announcing Network Standard NS272 - Underground Cable Rating
This Ausgrid Network Standard describes the requirements for undertaking steady-state rating calculations for underground cables that form part of the Ausgrid transmission and distribution cable network.
NSA2000: Amending Network Standard NS261 - Requirement for Design Compliance Framework for Network Standards
Amending Network Standard NS261, Requirements for Design Compliance Framework for Network Standards
